MemberDecember 28, 2015 at 1:51 pm
225 used a push rod setup under the seat beside the swivel boss iirc.
I’m guessing the seat is newer – from a 300 or similar where the downside arm rest has the linkage connected.
If so then there is usually a small crossbar held in by a couple of circlips at the back of the arm – one to hold the bar in place and one to hold the ring that connects to the cable release in position.
It may be that this has dropped off, there is usually a spare on the other arm if so.
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.