MemberOctober 24, 2013 at 7:34 pm
thanks kevin i`m beside glasgow airport. this is a used unit i got from a house with identical staircase so knew it would fit. the swivel switch is ok but this problem only occurred after replacing the power hinge retaining screw which was missing and shorting both wires to the hinge motor. the screw was just a little longer than it should have been. i think i also damaged the pcb but have replaced that after checking the numbers against the card compatability chart and chair now travels and tilts as normal and swivels at top as it should. anyway have located a replacement hinge which is on its way from glamorgan and will be fitted in a couple of days (giving me enough time to get house in order before the wife descends on me). will keep you posted.
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.