AnonymousDeleted UserAugust 14, 2020 at 6:02 pm
flick the isolator switch cover open, flick the switch to off, between the carriage covers is the locking section for the covers, small terminal in the hole to release the locking clip and slide it out and the covers will fall off! the batteries should be easy to spot! the main board folds up out the way making access to them a little easier if needed? be sure to clip the board back into place, when your all done, covers on, replace the restraining clip, pop the isolator switch cover open, flick the switch back on and shut the cover, the lift will make a few clicks and buzz’s as it does a reset and your done
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.