MemberJune 4, 2020 at 10:25 am
the grey coms wire should have between 8v – 12v when the lift reaches the top it should jump to 24v when swivel kicks in and drop back down. you say you have a powered footplate did that work ?? if both are not work inside the pack there is a 5amp fuse check this if that is all fine then the issue will start from the main pcb the change over relay is jammed and will need replaced if it has shorted it my have took out the 126pcb as well
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.