AnonymousDeleted UserMay 7, 2020 at 2:15 pm
Code 3 is end limit switch activated, pull the motor connections off the board and apply 12volts to them and see if the motor kicks into life? If yes then itâ€™s a board issue, if you have a powered footrest? Swap the boards over, the dip switches on the boards are set different so log the settings before you swap the boards
1,2,4 off 3 on powered seat
1,2 on 3,4off powered footrest
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.