MemberMay 7, 2020 at 2:05 pm
Firstly switch off lift ( the black on/off switch ) on the carriage for 30 seconds and then turn back on and check again. You will be amazed how many times this works
Could be the swivel pcb but it’s rare. Can you hear the relay click which indicates voltage going to the motor?
Wire a 12 v battery direct to the swivel motor to make sure it swivels ok, if it tries to swivel the wrong way just swap the wires over
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.