AnonymousDeleted UserMarch 1, 2020 at 7:17 pm
the rail can be split if needed? we use to set them up so that only a short peice of the non fixed rack was ovelapping the joint, it made resites easier
if you look at the rack you will see its in sections, held in place by resessed allen key bolts, if it needs to be split just loosen off the ones on the upside section of joint and slide the joint apart, that way when the rail is put back together you havent disturbed the rack pitch and it should still run ok over the joints
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.