MemberAugust 27, 2018 at 4:12 pm
The program is on a smart card in the main PCB which you shouldn’t need to touch you’ll probably just need to reset the datum, open the case and you’ll see two control switches one two way and one three way, set the three way to the flat arrows and the other switch will then drive the lift up or down.
Take it up to the top charge point, flip the switch to the circular arrow and level the seat, move the three way back to center and the lift should behave correctly. Check the remotes are operational as well.
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.