MemberMay 6, 2018 at 9:25 pm
There are many possible problems here, is the carriage the same? Are they on the same software version? Are they both wireless or wired UI’s you’ll need to set up CP0 and CP1 for the new lift.
Then you’ll need to program their halt positions.
This is all very easy……when you know what you are doing
I would echo fredts suggestion of getting someone who knows what they are doing to at least do this job with you, that way you at least get an explanation of what is being done.
The Stairlift Forum
Find answers, ask questions, and connect with our
community around the world.