MemberNovember 4, 2015 at 5:54 pm
Hi, has anyone got the fault code diagnosis meanings for the stannah 600? Cheers Telf.
MemberNovember 17, 2015 at 10:33 pm
Nearly two weeks and no one has stannah 600 fault code meanings! I’m gonna have to keep my eyes peeled for a stannah engineer whilst on my travels and bribe him with costa coffee and 5 bob note..
MemberApril 17, 2016 at 8:09 am
– = not charging
1= low batteries
2 = normal
3 = safe edge
4 = keyswitch off
5 = chair arm up
6= seatbelt not clipped in (optional extra)
8 = emergency lower/raise switch delatched
there are further diagnostics on the main ecu accessed by pressing buttons and reading led codes and referring to a manual to match the code to a fault. It is very specific and will point you directly to anything in the fault 9 group. The system is not analogue and runs on a kind of canbus type logis on an a and b circuit using pulses so be careful with multi meters as this can damage the ecu.
MemberMay 29, 2016 at 8:57 am
Cheers ian, only just seen this post, ðŸ‘
Log in to reply.