News Feed › Forums › Stairlifts › Stannah 420 with hinge rail – copper charging strip connection question
-
Stannah 420 with hinge rail – copper charging strip connection question
-
Hi, my first post is a cry for help! I removed the 3 copper strips from my moms machine to clean them but stupidly didn’t make a note of which wires were connected to which strips so now I can’t rewire it. The three wires are red, brown and blue. The stairlift is fitted on the right hand side of the stairs looking up. Can anyone help me with this so I can get it working again?! Many thanks, Paul
-
Put the red in the middle. Put lift part way down the rail and manualy push the hinge down about half way. Then connect blue to top brown to bottom. Drive lift down and if hinge goes down all good. If hinge comes up reverse brown and blue.
Viewing 1 - 2 of 2 replies